Herga Pressure Sensor, 12.61psi Min, 1.61mbar Max, Differential Reading

RS kodas: 511-7361Gamintojas: HergaGamintojo kodas: 6101-0029
brand-logo
Žiūrėti viską Slėgio jutikliai

Techniniai dokumentai

Specifikacijos

Markė

Herga

Pressure Reading Type

Differential

Minimum Pressure Reading

12.61psi

Maximum Pressure Reading

1.61mbar

Media Measured

Air

Supply Voltage

125 V ac

Housing Material

Fibreglass

Minimali darbinė temperatūra

-40°C

Maksimali darbinė temperatūra

+85°C

Kilmės šalis

United States

Produkto aprašymas

Ultra Low Pressure, Vacuum or Differential Pressure Switch

Products are screw adjustable but are factory fitted with specific pressure rated springs which are not interchangeable. As the contact pressure is dependent on the air pressure, the switch rating will be reduced when used at the minimum operating pressures. The connection terminals on this version exit vertically downwards from the lowest face in relation to the image shown above.

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

€ 57,06

už 1 vnt. (be PVM)

€ 69,04

už 1 vnt. (su PVM)

Herga Pressure Sensor, 12.61psi Min, 1.61mbar Max, Differential Reading
sticker-462

€ 57,06

už 1 vnt. (be PVM)

€ 69,04

už 1 vnt. (su PVM)

Herga Pressure Sensor, 12.61psi Min, 1.61mbar Max, Differential Reading
Sandėlio informacija laikinai nepasiekiama.
sticker-462

Techniniai dokumentai

Specifikacijos

Markė

Herga

Pressure Reading Type

Differential

Minimum Pressure Reading

12.61psi

Maximum Pressure Reading

1.61mbar

Media Measured

Air

Supply Voltage

125 V ac

Housing Material

Fibreglass

Minimali darbinė temperatūra

-40°C

Maksimali darbinė temperatūra

+85°C

Kilmės šalis

United States

Produkto aprašymas

Ultra Low Pressure, Vacuum or Differential Pressure Switch

Products are screw adjustable but are factory fitted with specific pressure rated springs which are not interchangeable. As the contact pressure is dependent on the air pressure, the switch rating will be reduced when used at the minimum operating pressures. The connection terminals on this version exit vertically downwards from the lowest face in relation to the image shown above.