Techniniai dokumentai
Specifikacijos
Encoder Technology
Incremental
Pulses Per Revolution
15
Shaft Diameter
6mm
Shaft Type
Solid
Overall Depth
11.7mm
Overall Width
13.75mm
Overall Height
31.6mm
Markė
Alps AlpineTvirtinimo tipas
Panel Mount
Supply Voltage
5 V dc
Kilmės šalis
Japan
Produkto aprašymas
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Supplied with
User instructions
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 5,035
Each (In a Pack of 5) (be PVM)
€ 6,092
Each (In a Pack of 5) (su PVM)
5
€ 5,035
Each (In a Pack of 5) (be PVM)
€ 6,092
Each (In a Pack of 5) (su PVM)
5
Pirkti dideliais kiekiais
kiekis | Vieneto kaina | Per Pakuotė |
---|---|---|
5 - 20 | € 5,035 | € 25,18 |
25 - 95 | € 4,418 | € 22,09 |
100 - 245 | € 3,848 | € 19,24 |
250 - 495 | € 3,61 | € 18,05 |
500+ | € 3,42 | € 17,10 |
Techniniai dokumentai
Specifikacijos
Encoder Technology
Incremental
Pulses Per Revolution
15
Shaft Diameter
6mm
Shaft Type
Solid
Overall Depth
11.7mm
Overall Width
13.75mm
Overall Height
31.6mm
Markė
Alps AlpineTvirtinimo tipas
Panel Mount
Supply Voltage
5 V dc
Kilmės šalis
Japan
Produkto aprašymas
GSM2 Stepper Motor Drive Board
The GSM2 is a standalone drive board designed to drive a stepper motor in unipolar mode. It is done either with or without forcing resistors connected between motor commons and volts. When using the logic connections, you are able to select full, half or wave mode and direction and speed external clock. The GSM2 drive board allows an enable and disable input for various start/stop control options. The stepper motor used with the board must also have four phases and five, six or eight wires.
Supplied with
User instructions