Legris LF3000 Series Tee Threaded Adaptor, Push In 6 mm to Push In 6 mm, Threaded-to-Tube Connection Style
Techniniai dokumentai
Specifikacijos
Markė
LegrisConnector A
Push In 6 mm
Connector B
Push In 6 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Tube Connection B - Type
Push In
Kilmės šalis
France
Produkto aprašymas
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
Threaded Tube Adaptors, Elbows and Tees
€ 41,32
€ 8,265 Each (In a Pack of 5) (be PVM)
€ 50,00
€ 10,001 Each (In a Pack of 5) (su PVM)
5
€ 41,32
€ 8,265 Each (In a Pack of 5) (be PVM)
€ 50,00
€ 10,001 Each (In a Pack of 5) (su PVM)
5
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
| kiekis | Vieneto kaina | Per Pakuotė |
|---|---|---|
| 5 - 20 | € 8,265 | € 41,32 |
| 25 - 45 | € 8,075 | € 40,38 |
| 50+ | € 7,505 | € 37,52 |
Techniniai dokumentai
Specifikacijos
Markė
LegrisConnector A
Push In 6 mm
Connector B
Push In 6 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Body Material
Glass Reinforced Nylon
Minimali darbinė temperatūra
-20°C
Maksimali darbinė temperatūra
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Tube Connection B - Type
Push In
Kilmės šalis
France
Produkto aprašymas
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
Threaded Tube Adaptors, Elbows and Tees