Techniniai dokumentai
Specifikacijos
Markė
Texas InstrumentsNumber of Transceivers
1
Protocols Supported
USB 1.0, USB 1.1
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
5 V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
SOIC W
Kaiščių skaičius
28
Matmenys
17.91 x 7.49 x 2.34mm
Aukštis
2.34mm
Ilgis
17.91mm
Maksimali darbinė temperatūra
+70 °C
Minimali darbinė temperatūra
0 °C
Plotis
7.49mm
Produkto aprašymas
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
USB (Universal Serial Bus), Texas Instruments
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 9,66
už 1 vnt. (be PVM)
€ 11,69
už 1 vnt. (su PVM)
1
€ 9,66
už 1 vnt. (be PVM)
€ 11,69
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 4 | € 9,66 |
5 - 9 | € 8,50 |
10 - 49 | € 8,08 |
50 - 99 | € 7,46 |
100+ | € 6,72 |
Techniniai dokumentai
Specifikacijos
Markė
Texas InstrumentsNumber of Transceivers
1
Protocols Supported
USB 1.0, USB 1.1
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
5 V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
SOIC W
Kaiščių skaičius
28
Matmenys
17.91 x 7.49 x 2.34mm
Aukštis
2.34mm
Ilgis
17.91mm
Maksimali darbinė temperatūra
+70 °C
Minimali darbinė temperatūra
0 °C
Plotis
7.49mm
Produkto aprašymas
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.