Techniniai dokumentai
Specifikacijos
Markė
Texas InstrumentsNumber of Transceivers
1
IC Type
Controller IC
Protocols Supported
USB 3.0
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
1.1 V, 3.3 V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
HTQFP
Kaiščių skaičius
48
Matmenys
7.2 x 7.2 x 1.05mm
Aukštis
1.05mm
Ilgis
7.2mm
Maksimali darbinė temperatūra
+70 °C
Plotis
7.2mm
Minimali darbinė temperatūra
0 °C
Kilmės šalis
Philippines
Produkto aprašymas
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
USB (Universal Serial Bus), Texas Instruments
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 4,845
Each (In a Tube of 250) (be PVM)
€ 5,862
Each (In a Tube of 250) (su PVM)
250
€ 4,845
Each (In a Tube of 250) (be PVM)
€ 5,862
Each (In a Tube of 250) (su PVM)
250
Techniniai dokumentai
Specifikacijos
Markė
Texas InstrumentsNumber of Transceivers
1
IC Type
Controller IC
Protocols Supported
USB 3.0
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
1.1 V, 3.3 V
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
HTQFP
Kaiščių skaičius
48
Matmenys
7.2 x 7.2 x 1.05mm
Aukštis
1.05mm
Ilgis
7.2mm
Maksimali darbinė temperatūra
+70 °C
Plotis
7.2mm
Minimali darbinė temperatūra
0 °C
Kilmės šalis
Philippines
Produkto aprašymas
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.