TE Connectivity Right Angle Cable Boot, 30mm
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityType
Right Angle Cable Boot
Inside Diameter Primary
30mm
Inside Diameter Secondary
30mm
Adhesive Lined
No
Number of Breakouts
1
Minimali darbinė temperatūra
-55°C
Maksimali darbinė temperatūra
+135°C
Shrunk Diameter Primary
14.2mm
Shrunk Diameter Secondary
5.9mm
Produkto aprašymas
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
P.O.A.
1
P.O.A.
Sandėlio informacija laikinai nepasiekiama.
1
Sandėlio informacija laikinai nepasiekiama.
Techniniai dokumentai
Specifikacijos
Markė
TE ConnectivityType
Right Angle Cable Boot
Inside Diameter Primary
30mm
Inside Diameter Secondary
30mm
Adhesive Lined
No
Number of Breakouts
1
Minimali darbinė temperatūra
-55°C
Maksimali darbinė temperatūra
+135°C
Shrunk Diameter Primary
14.2mm
Shrunk Diameter Secondary
5.9mm
Produkto aprašymas
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.