Techniniai dokumentai
Specifikacijos
Gender
Female
Matmenys
68.15 x 48 x 18 mm
Connector Size
4 mm
Contact Plating
Nickel
Contact Material
Brass
Užbaigimo būdas
Solder
Srovės įvertinimas
25A
Spalva
Red
Aukštis
28.94mm
Ilgis
29.5mm
Markė
StaubliKilmės šalis
Switzerland
Produkto aprašymas
Industrial & Marine Xenon Beacon, X450 Series
The X450 Xenon beacon is suitable for Industrial & Marine signalling applications where a visual signal is required to operate in very harsh environmental conditions.
The beacons have a flashing mode light effect (single stage alarm). Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and the discharging a large current through the xenon gas in the tube.
This warning beacon has multiple flash rate settings, that can be set at installation, that range from 60 flashes per minute up to 180 flashes per minute to create a more noticeable warning signal to the human eye. The design of this beacon allows for termination in the base.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 7,09
Each (In a Pack of 5) (be PVM)
€ 8,58
Each (In a Pack of 5) (su PVM)
5
€ 7,09
Each (In a Pack of 5) (be PVM)
€ 8,58
Each (In a Pack of 5) (su PVM)
5
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 9 | € 7,09 |
10 - 24 | € 6,55 |
25 - 49 | € 6,03 |
50+ | € 5,48 |
Techniniai dokumentai
Specifikacijos
Gender
Female
Matmenys
68.15 x 48 x 18 mm
Connector Size
4 mm
Contact Plating
Nickel
Contact Material
Brass
Užbaigimo būdas
Solder
Srovės įvertinimas
25A
Spalva
Red
Aukštis
28.94mm
Ilgis
29.5mm
Markė
StaubliKilmės šalis
Switzerland
Produkto aprašymas
Industrial & Marine Xenon Beacon, X450 Series
The X450 Xenon beacon is suitable for Industrial & Marine signalling applications where a visual signal is required to operate in very harsh environmental conditions.
The beacons have a flashing mode light effect (single stage alarm). Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and the discharging a large current through the xenon gas in the tube.
This warning beacon has multiple flash rate settings, that can be set at installation, that range from 60 flashes per minute up to 180 flashes per minute to create a more noticeable warning signal to the human eye. The design of this beacon allows for termination in the base.