Techniniai dokumentai
Specifikacijos
Markė
ParkerMaximum Time
3s
Minimum Time
0.1s
Maksimali darbinė temperatūra
+60°C
Manufacturer Series
PRT
Minimum Operating Pressure
3bar
Maximum Operating Pressure
8 bar
Minimali darbinė temperatūra
-15°C
Produkto aprašymas
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 271,70
už 1 vnt. (be PVM)
€ 328,76
už 1 vnt. (su PVM)
1
€ 271,70
už 1 vnt. (be PVM)
€ 328,76
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 4 | € 271,70 |
5+ | € 261,25 |
Techniniai dokumentai
Specifikacijos
Markė
ParkerMaximum Time
3s
Minimum Time
0.1s
Maksimali darbinė temperatūra
+60°C
Manufacturer Series
PRT
Minimum Operating Pressure
3bar
Maximum Operating Pressure
8 bar
Minimali darbinė temperatūra
-15°C
Produkto aprašymas
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.