Techniniai dokumentai
Specifikacijos
Markė
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 12V ac
Galingumas
225VA
Number of Outputs
2
Secondary Current
9.38A
Aukštis
47mm
Weight
1.9kg
Diameter
112mm
Matmenys
112 (Dia.) x 47mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Kilmės šalis
Czech Republic
Produkto aprašymas
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 114,00
už 1 vnt. (be PVM)
€ 137,94
už 1 vnt. (su PVM)
1
€ 114,00
už 1 vnt. (be PVM)
€ 137,94
už 1 vnt. (su PVM)
1
Pirkti dideliais kiekiais
kiekis | Vieneto kaina |
---|---|
1 - 9 | € 114,00 |
10 - 24 | € 107,35 |
25 - 49 | € 95,95 |
50 - 74 | € 85,02 |
75+ | € 73,62 |
Techniniai dokumentai
Specifikacijos
Markė
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 12V ac
Galingumas
225VA
Number of Outputs
2
Secondary Current
9.38A
Aukštis
47mm
Weight
1.9kg
Diameter
112mm
Matmenys
112 (Dia.) x 47mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Kilmės šalis
Czech Republic
Produkto aprašymas
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558