Techniniai dokumentai
Specifikacijos
Markė
MicrochipData Rate
12Mbps
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
QFN
Kaiščių skaičius
24
Transmitter Signal Type
Single Ended
Receiver Signal Type
Differential
Interface Standards
EMV 4.2/4.3, ETSI TS 102 221, ISO/IEC 7816, PC/SC
Power Supply Type
Single
Typical Single Supply Voltage
3.6 → 5.5 V
Aukštis
0.95mm
Plotis
5.1mm
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Ilgis
5.1mm
Matmenys
5.1 x 5.1 x 0.95mm
Kilmės šalis
Thailand
Produkto aprašymas
SEC1110/1210 Smart Card to USB/SPI/UART Bridges
The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to the latest USB and EMV standards to ensure interoperability with the latest and legacy Smart Card systems alike.
To simplify the development of custom USB-based applications these devices integrate USB Chip Card Interface Device (CCID) firmware. Also on-board is One-Time Programmable memory which can be utilised to host custom firmware or device data.
USB (Universal Serial Bus) - Microchip
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 2,468
Each (In a Tray of 490) (be PVM)
€ 2,986
Each (In a Tray of 490) (su PVM)
490
€ 2,468
Each (In a Tray of 490) (be PVM)
€ 2,986
Each (In a Tray of 490) (su PVM)
490
Techniniai dokumentai
Specifikacijos
Markė
MicrochipData Rate
12Mbps
Tvirtinimo tipas
Surface Mount
Pakuotės tipas
QFN
Kaiščių skaičius
24
Transmitter Signal Type
Single Ended
Receiver Signal Type
Differential
Interface Standards
EMV 4.2/4.3, ETSI TS 102 221, ISO/IEC 7816, PC/SC
Power Supply Type
Single
Typical Single Supply Voltage
3.6 → 5.5 V
Aukštis
0.95mm
Plotis
5.1mm
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Ilgis
5.1mm
Matmenys
5.1 x 5.1 x 0.95mm
Kilmės šalis
Thailand
Produkto aprašymas
SEC1110/1210 Smart Card to USB/SPI/UART Bridges
The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to the latest USB and EMV standards to ensure interoperability with the latest and legacy Smart Card systems alike.
To simplify the development of custom USB-based applications these devices integrate USB Chip Card Interface Device (CCID) firmware. Also on-board is One-Time Programmable memory which can be utilised to host custom firmware or device data.