Techniniai dokumentai
Specifikacijos
Markė
MicrochipMemory Size
2kbit
Interface Type
Serial
Pakuotės tipas
SOT-23
Tvirtinimo tipas
Surface Mount
Kaiščių skaičius
3
Organisation
256 x 8 bit
Minimum Operating Supply Voltage
1.8 V
Maximum Operating Supply Voltage
5.5 V
Number of Bits per Word
8bit
Matmenys
3.05 x 1.4 x 1.02mm
Number of Words
256
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Data Retention
200yr
Produkto aprašymas
11AAxxx/11LCxxx UNI/O™ Serial EEPROM
The Microchip 11AAxxx/11LCxxx family of devices are Serial EEPROMs featuring Microchips proprietary UNI/O™ Serial Bus.
UNI/O™ Serial EEPROM devices require only one connection to a host Microcontroller as clock and data communications are combined into a single serial bit stream. The result is that UNI/O™ devices require one Microcontroller I/O instead of the 2 to 6 (depending on configuration) that I2C, Microwire and SPI bus EEPROM devices require. To the designer this opens up the possibility of employing a smaller host MCU with fewer I/Os, reducing the MCU cost and allowing for a more compact design.
EEPROM Serial Access - Microchip
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 0,31
Už kiekviena vnt. (tiekiama juostoje) (be PVM)
€ 0,375
Už kiekviena vnt. (tiekiama juostoje) (su PVM)
Standartas
20
€ 0,31
Už kiekviena vnt. (tiekiama juostoje) (be PVM)
€ 0,375
Už kiekviena vnt. (tiekiama juostoje) (su PVM)
Standartas
20
Techniniai dokumentai
Specifikacijos
Markė
MicrochipMemory Size
2kbit
Interface Type
Serial
Pakuotės tipas
SOT-23
Tvirtinimo tipas
Surface Mount
Kaiščių skaičius
3
Organisation
256 x 8 bit
Minimum Operating Supply Voltage
1.8 V
Maximum Operating Supply Voltage
5.5 V
Number of Bits per Word
8bit
Matmenys
3.05 x 1.4 x 1.02mm
Number of Words
256
Minimali darbinė temperatūra
-40 °C
Maksimali darbinė temperatūra
+85 °C
Data Retention
200yr
Produkto aprašymas
11AAxxx/11LCxxx UNI/O™ Serial EEPROM
The Microchip 11AAxxx/11LCxxx family of devices are Serial EEPROMs featuring Microchips proprietary UNI/O™ Serial Bus.
UNI/O™ Serial EEPROM devices require only one connection to a host Microcontroller as clock and data communications are combined into a single serial bit stream. The result is that UNI/O™ devices require one Microcontroller I/O instead of the 2 to 6 (depending on configuration) that I2C, Microwire and SPI bus EEPROM devices require. To the designer this opens up the possibility of employing a smaller host MCU with fewer I/Os, reducing the MCU cost and allowing for a more compact design.