ifm electronic Through Beam Photoelectric Sensor, Fork Sensor, >0.5 mm Detection Range IO-LINK
Techniniai dokumentai
Specifikacijos
Markė
ifm electronicSensor Style
Fork
Detection Type
Through Beam
Detection Range
>0.5 mm
Output Type
PNP
Electrical Connection
M8 3 Pin Connector
Communication Protocol
IO-LINK
Maximum dc Voltage
35V
Terminal Type
Quick Disconnect
Light Source
LED
IP Rating
IP67
Maximum Current
30 mA
Maksimali darbinė temperatūra
+60°C
Housing Material
Die Cast Zinc
Minimali darbinė temperatūra
-25°C
Standards Met
CE, cULus
Kilmės šalis
Germany
Produkto aprašymas
ifm OPU Optical Fork Sensors
ifm OPU series optical fork sensors with a robust metal housing offer quick setup with no need to align a transmitter and receiver. These optical sensors are used in particular for part monitoring in feeder and handling systems. Further application examples are belt edge or double feed monitoring with the exact sensitivity setting via potentiometer being helpful. The fine light beam with its constant small diameter is also ideal for monitoring shaft imbalance.
Sandėlio informacija laikinai nepasiekiama.
Patikrinkite dar kartą.
€ 231,66
€ 231,66 už 1 vnt. (be PVM)
€ 280,31
€ 280,31 už 1 vnt. (su PVM)
1
€ 231,66
€ 231,66 už 1 vnt. (be PVM)
€ 280,31
€ 280,31 už 1 vnt. (su PVM)
1
Techniniai dokumentai
Specifikacijos
Markė
ifm electronicSensor Style
Fork
Detection Type
Through Beam
Detection Range
>0.5 mm
Output Type
PNP
Electrical Connection
M8 3 Pin Connector
Communication Protocol
IO-LINK
Maximum dc Voltage
35V
Terminal Type
Quick Disconnect
Light Source
LED
IP Rating
IP67
Maximum Current
30 mA
Maksimali darbinė temperatūra
+60°C
Housing Material
Die Cast Zinc
Minimali darbinė temperatūra
-25°C
Standards Met
CE, cULus
Kilmės šalis
Germany
Produkto aprašymas
ifm OPU Optical Fork Sensors
ifm OPU series optical fork sensors with a robust metal housing offer quick setup with no need to align a transmitter and receiver. These optical sensors are used in particular for part monitoring in feeder and handling systems. Further application examples are belt edge or double feed monitoring with the exact sensitivity setting via potentiometer being helpful. The fine light beam with its constant small diameter is also ideal for monitoring shaft imbalance.