EMERSON – ASCO Solenoid Valve G356A002SBD2, 3 port(s) , NC, 24 V dc, 1/8in

RS kodas: 489-068Gamintojas: EMERSON – ASCOGamintojo kodas: G356A002SBD2
brand-logo

Techniniai dokumentai

Specifikacijos

Supply Voltage

24 V dc

Number of Ports

3

Connection Size

1/8in

Connection

1/8 in G Female

Operation

Direct

Default Valve Position

NC

Suitable Applications

Air, Inert Gas, Oil, Water

Type

3/2

Orifice Diameter

1.6mm

Serija

356

Body Material

Brass

Maximum Working Pressure

10 bar

Operating Temperature Range

-10 → +60 °C

Maksimali darbinė temperatūra

+60°C

Connection Gender

Female

Minimali darbinė temperatūra

-10°C

Thread Standard or Connection Type

G

Maximum Opening Time

10ms

Maximum Closing Time

10ms

Flow Factor Kv

0.08m³/h

Kilmės šalis

United Kingdom

Produkto aprašymas

Three-way, Zero Pressure, N/C Valves

Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Sandėlio informacija laikinai nepasiekiama.

Patikrinkite dar kartą.

Sandėlio informacija laikinai nepasiekiama.

€ 65,10

už 1 vnt. (be PVM)

€ 78,77

už 1 vnt. (su PVM)

EMERSON – ASCO Solenoid Valve G356A002SBD2, 3 port(s) , NC, 24 V dc, 1/8in
sticker-462

€ 65,10

už 1 vnt. (be PVM)

€ 78,77

už 1 vnt. (su PVM)

EMERSON – ASCO Solenoid Valve G356A002SBD2, 3 port(s) , NC, 24 V dc, 1/8in
Sandėlio informacija laikinai nepasiekiama.
sticker-462

Techniniai dokumentai

Specifikacijos

Supply Voltage

24 V dc

Number of Ports

3

Connection Size

1/8in

Connection

1/8 in G Female

Operation

Direct

Default Valve Position

NC

Suitable Applications

Air, Inert Gas, Oil, Water

Type

3/2

Orifice Diameter

1.6mm

Serija

356

Body Material

Brass

Maximum Working Pressure

10 bar

Operating Temperature Range

-10 → +60 °C

Maksimali darbinė temperatūra

+60°C

Connection Gender

Female

Minimali darbinė temperatūra

-10°C

Thread Standard or Connection Type

G

Maximum Opening Time

10ms

Maximum Closing Time

10ms

Flow Factor Kv

0.08m³/h

Kilmės šalis

United Kingdom

Produkto aprašymas

Three-way, Zero Pressure, N/C Valves

Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.